City · Washington

Seattle: Owner to the tee or wye, not including it

In Seattle the side sewer is a private pipe, and it does not stop at the property line. Seattle Public Utilities says the owner keeps it until it meets the public main. The tee, wye, or connection itself is not part of that private pipe.

By C. V. Wooster, Taciturn Studios · Checked November 21, 2026 · How we research

Last verified against the official pages listed below. If a number is not on those pages, it is not on this one.

Seattle Public Utilities assignment, as published
Side sewer, yard and street, up to the connectionProperty owner
Tee, wye, or connectionUtility or city
Public sewer mainUtility or city

Open this place in the checker Seattle Public Utilities

Active flooding, sewer backups, leaks, and spills, as listed by SPU: 206-386-1800

The side sewer includes the length under the street

Seattle Public Utilities describes a side sewer as the pipe that carries wastewater from a building to the public sewer in the street. On the side sewer page, SPU says that if you own the home or building, you own the side sewer to the public sewer main. The maintenance page says the same thing in slightly different words: you own it until it connects to the public sewer pipe. The permit page draws the line more tightly. The entire side sewer, all the way to the connection to the public main, is owned and maintained by the property owner, up to but not including the tee, wye, or connection.

That is a different deal from a city that stops at the curb or the property line. The expensive dig in Seattle is often in the parking strip or the street, and SPU's pages put that length on the owner. Piping inside the building is treated as plumbing and is permitted by Seattle-King County Public Health, not as a side sewer. SPU lists side sewer permits at (206) 684-5362.

Where two private pipes join, the neighbors share the rest

SPU's side sewer page has a separate section for shared pipes, because a lot of older blocks were built that way. Sharing means the pipe that leaves your property combines with a neighbor's pipe before either one reaches the public main. From that meeting point out to the main, SPU says you and the neighbors share maintenance and repair. The page points to Seattle Municipal Code 21.16.030 for who counts as a responsible party, and to 21.16.354 for joint and several liability.

SPU's advice on that page is practical rather than a cost-share formula. It tells owners to agree on the scope and the contractor, and it says it recommends at least three bids before work starts. The utility will notify neighbors about responsibility on a shared side sewer if you ask through SideSewerRequests@seattle.gov. It does not publish a default percentage split, so this page does not invent one.

The permit covers work on the lot and in the right-of-way

SPU's side sewer permit page says a side sewer permit is required to connect a property to the public sewer or storm drain, to repair, alter, or add to a side sewer, to cap or abandon one, and to inspect required onsite drainage control. The same permit covers proposed work on private property and within the public right-of-way. That matches the ownership rule: the private pipe and the public right-of-way are not two different owners.

Ordinance 123494, which amended the side sewer code, states the ownership rule in section 21.16.190: side sewers, whether in a public or private place, shall be owned, installed, operated, and maintained by the owner or occupant of the property served, up to but not including the tee, wye, or connection to the public main. SPU also says it can help locate the side sewer on its map, review a scope video where the connection may be damaged, and check whether it already has an inspection video of the connection. That review is not a promise to pay for the repair.

Before you call Seattle Public Utilities

A shared side sewer changes who pays from the point the pipes join. An easement or a private street can change the map. SPU's page is the rule for its system, not a survey of your lot.

The comparison table puts this split next to the other places we have sourced. The method explains why a city with no page is left out.

Rules that do not match Seattle

Sources

  1. Seattle Public Utilities, Your Side Sewer
  2. Seattle Public Utilities, Side Sewer Permits
  3. Seattle Public Utilities, Side Sewer Maintenance
  4. Seattle Ordinance 123494, SMC 21.16 side sewers